Category Archives: >$3000

Ultimaker 3 Review: A Dual Head Printer Worth the Money?

Ultimaker 3 review

This Ultimaker 3 review is about a prosumer dual extruder 3d ultimaker 3 review: first look

printer with wireless control, operating on the FFF (fused filament fabrication) method. It is an industrial grade printer equally at home on the desktop as in the living room.

Lets have a closer look at it

It’s large build volume of 215x215x200mm ( 8.5×8.5×7.9in) defies the outer size, as it fits conveniently on your desktop. Outer dimensions 342x380x398mm( 13.5x15x15.5in). (The print volume ultimaker 3 review: large build volume

drops slightly when in dual material mode to 197x215x200mm (7.75×8.5×7.9in). There is also an extended model with the Z axis extended up to 300mm.

The printer comes with two print cores for build and support material. The customized nozzle geometry reduces the risk of clogging and give you a more reliable 3d print experience. There is an integrated pcb on the print head to ensure a more accurate temperature control and superior print quality.

The ultimaker 3 can print at temperatures up to 280C, so the printer can print in a number of different materials.ultimaker 3 dual print heads

Fast print core changes mean fast up time and easier maintenance, there is nothing worse than a nozzle clog to annoy you when you are up against the clock to print something out.

There are led lights within the print core housing to alert you to any user interaction required.

For easy print removal and maintenance there is a removable glass plate. To remove the glass plate simply rotate the clips out of the way and remove towards the front. Make sure the glass is cold before removal. When using the glue stick for adhesion you will be soaking the glass plate and model in water to dissolve the glue.

Levelling the build platform is effortless. When you use it for the ultimaker 3 print calibration

first time, simply set the right height by turning the build platform height knob and inserting the supplied calibration card.

After this the ultimaker’s built-in levelling routine does it automatically. The capacitive sensor in the print head measures the distance between the build platform and the nozzle.

When starting a print the offset height is compensated for by adjusting the Z axis height in the first layers. This results in more accurate levelling, build platform adhesion and optimised print quality.

Installation of the correct materials for your model is simplicity, automatic recognition of the reels as they are placed on the printer allow, when connected, the CURA software to load the optimal profiles for quality printing.

The recognition system is NFC built into the material carrier. If you are not using ultimaker material reels then you will need to enter the material manually.

ultimakers range of materials are formulated to give you superior results and the open filament system allows you to experiment with all different types of materials.

To bring your 3d model to life, you will need to prepare it for printultimaker 3 cura software

using CURA, ultimakers free slicing software. You can stick with the presets for the materials or tinker with the advanced settings.

You can print directly from your pc via the WIFI or LAN settings, alternatively you can load the gcode files onto a usb drive that slots into the front of the ultimaker 3.

The control panel on the printer lets you make any adjustments during the print. The control panel allows updates to the software, when connected to the LAN.

The ultimaker 3 is the most reliable durable dual extruder on the ultimaker 3 dual colour prints

market. Combine two build materials for two colour 3d print or achieve state of the art complexity with build and water soluble support material. This allows you to approach your design process in a completely new way and create astoundingly complex designs.

Ultimakers 3 unique nozzle lifting system ensures that there are no nozzle collision while printing and no problematic oozing.

The powerful geared feeders ensure a more reliable result and superior print quality.

The ultimaker3 features a build platform that is lighter and stiffer which reduces vibrations and produces an unrivalled print quality.

With the heated glass plate you can print using many different materials and have improved build plate adhesion.

Ultimaker 3 has a powerful triple fan system, featuring two new radial fans and fan shrouds. It creates greater airflow, this means better cooling, high quality bridging, faster print times and smoother surfaces.

With the addition of the live camera, you can monitor every stage of ultimaker 3 livecam

your 3d printing project remotely, simply by connecting to WIFI.

The ultimaker 3 has a large layer resolution of 20 to 200 microns. Which allows for remarkably detailed prints or superfast prototypes.

Printing with pla and pva allows complex designs to be printed in place without any post printing assembly, using the water soluble pva as a support material.pva-dropping-off

Pva can also be printed in dual extrusion with ultimker nylon, an ideal material for exceptionally strong functional prototypes.

Using two build materials you can also produce dual colour prints for more realistic concept models.

The ultimaker 3 comes with free lifetime technical support and warranty provided by certified experts worldwide.

When you put it all together the ultimaker 3 is the most industrial grade desktop 3d printer on the market.

With the price of the printer currently topping £3k, is it worth it?

To get the features within the printer along with the ease of calibration. Your printer will be producing high quality prints time after time.

So the ultimaker 3 review has shown it to be a  very very capable printer from a good quality manufacturer.



Best 3d printer review: 3ds CubePro 3D Printer

The Cubepro Trio 3d Printer Reviewbest 3d printer review: 3ds logo

The best 3d printer review brings you a large volume 3d printer.  Made by 3d systems in America, the 3ds Cubepro 3d printer fits into the prosumer area of printers, it is equally at home on your desk at work or in your best 3d printer review: 3ds cubepro 3d printerliving room.
It is a FFF( Fused Filament Fabrication) type of printer. This is where the filament is melted and extruded out of a small nozzle, melted onto the previous layer, also called additive manufacturing.

Miracles of 3d printing

Printing miracles infographic
Presented By Cubify

Brief Specs

Build size:                  275 x 265 x 230mm (10.75” x 10.5” x 9.05”)
No. of nozzles :       3
Size:                              566 x 581 x 606 mm (22” x 22” x 24”)
Material:                    ABS, PLA, nylon, flex, wood, water soluble support

What does the 3ds Cubepro 3d printer have

Let’s explore these benefits a bit more

With the very large build area you are less restricted on the size of your designs. What you will have had to print in two or three parts on some other small printers you can easily print in one go on this machine.

You don’t need to have a physical connection with your printer, enabling it to be placed out of the way and not needing moving every time you want to print. The WIFI connection can be over a network so everybody can use it or you can connect a single computer to it for wireless printing.

The easy to read touchscreen display gives you guidance for every step you need to carry out on your printer. From initial setup to downloading models from the internet, the easy to read display with touch control allows the user full control.

One of the most frustrating things with 3d printers is the warping and non sticking of the model to the build platform. With the enclosed design the inside environment is temperature controlled to reduce this happening.

Do you want more than one colour, then this is the printer for you. Not one – not two but three print nozzles give you a very flexible printer capable of printing up to three colours or two colours and a support material. This allows your creativity to design items which on the single nozzle printer would be impossible.

When you design your creation, you can use the different materials available to you. Once finished designing all you have to do is to load up the simple to change cartridge system with the materials you want. The machine will tell you if there is not enough material left to print your model. Then press print. The enclosed cartridge system allows a moisture lock seal to be included, as the filament will absorb moisture. This simple feature significantly prolongs the shelf life of your cartridge.

Current Fused Filament Fabrication printers have an undesirable layered finish. Getting the size of the layers as small as possible is one way of reducing this ridging effect seen on many printed object. You have control over the print quality, if it is the final model set it to fine, if it is a prototype and you need it quickly then set the print quality to coarse.


Once the print is finished you remove it from the build platform, wash it off and marvel at your ability to print off 3d parts. If you have used the support material drop your piece into the support removal tank, with the liquid made up of either just hot water or caustic soda. This unit is available separately and features a heated tank along with a timer to prevent you from forgetting to switch it off.


Along with the standard materials of ABS and PLA you have nylon to make a more robust part. The 20 colours in the ABS and 11 colours in the PLA range will allow you a lot of flexibility in the colour of your designs.
The nylon material comes in three colours, with the flex material in four colours.
Some of the materials require a change in nozzle size – so be warned that you will need to calibrate the machine before using this new nozzle and after replacing the old one.


3d systems have their own software Invent which is easy to use, starting in 2d you sketch out your initial design. Then you move to the 3d area where you finish off the design. This is one of the first pieces of software designed specifically for the 3d printing market and with the beginner in mind. The software is available for a free trial with a low cost price it is ideal to match with your Cubepro 3d printer.

what would you use it for

Holidays in 3D infographic
Presented By Cubify

Would I buy it

It does look like a very good printer, a bit on the large side but with three print heads you have a lot of flexibility.
The large build area gives you flexibility
The easy to change cartridge system
With its high resolution printing the finished product will look good, and the ability to change colour part way through the print will give you stunning results.
The WIFI communication is excellent and allows the printer to be placed where you want it.
I am sure the range of materials will expand and keep up with what is available elsewhere in the industry.

For me the price is high, both of the printer and the cartridges, but for what you are getting – with the ease of use – maybe it’s not too bad.

Would I buy one – not at the moment, I am happy with my reprap prusa i3, only a single nozzle but I am an engineer at the end of the day – I like to play with engineering.

Would I recommend it – yes to those who would like to try out 3d printing in multiple materials or colours. With very little mess or hassle. Almost plug and play.

If you are thinking of buying one then check out the price here.

Leave a comment if the box below if you have a 3ds Cubepro 3d printer or are thinking of buying one, so we can find out your experiences.

Many thanks for reading